Roberts Gorden operation & service Service Manual Page 1

WARNINGFOR YOUR SAFETYIf you smell gas: 1. Open windows. 2. DO NOT try to light any appliance. 3. DO NOT use electrical switches. 4. DO NOT us

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL4 of 40SECTION 2: SPECIFICATIONSFigure 1: Keypad Layout2.1 Material2.1.1 Enclosu

SECTION 2: SPECIFICATIONS5 of 409. Enter key to confirm inputs (move backward around network).10.Temperature adjustment (optional, between engineer de

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL6 of 40SECTION 3: INSTALLATIONInstallation of ROBERTS GORDON® NRG Control must b

SECTION 3: INSTALLATION7 of 40Figure 5: Cable Entry3.2.6 Install electrical wiring in accordance with the correct wiring diagram in Section 4 to wirin

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL8 of 40Figure 8: Sensor Mounting Plate - Warm AirFigure 9: Remote Temperature Se

SECTION 4: WIRING9 of 40SECTION 4: WIRING4.1 Network WiringDANGERElectrical Shock HazardDisconnect electric before service.More than one disconnect sw

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL10 of 404.2 Low Voltage Wiring

SECTION 4: WIRING11 of 404.3 CTU Wiring (Pektron Ignition Controller) 4.4 CTCU Wiring (Pektron Ignition Controller)

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL12 of 404.5 CTU Wiring (Pactrol Ignition Controller) 4.6 CTCU Wiring (Pactrol Ig

SECTION 4: WIRING13 of 404.7 Interface Relay Wiring for Multiple Models CTU 70 - 115Description Part NumberInterface Relay Assembly D258

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL14 of 404.8 Interface Relay Wiring for Multiple Models CTCU 11 - 32 & CTU 40

SECTION 4: WIRING15 of 404.9 MGB/MOB Range Wiring - 1 Ø Cabinet Heaters

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL16 of 404.10 MGB/MOB Range Wiring - 3 Ø Cabinet Heaters4.11 Cabinet Heater Remot

SECTION 4: WIRING17 of 404.12 Cabinet Heater Remote Lockout Reset Wiring4.13 Unitary Radiant System Wiring

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL18 of 404.14 CORAYVAC® and Multiburner Systems WiringCAUTIONProduct Damage Hazar

SECTION 5: PROGRAMMING AND OPERATION19 of 40SECTION 5: PROGRAMMING AND OPERATION5.1 Stand Alone UnitThe control has three basic levels of operation /

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL20 of 405.3.2 Default SettingsThe following settings are factory defaults and wi

SECTION 5: PROGRAMMING AND OPERATION21 of 405.4 Network Open Level User Functions

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL22 of 405.4.1 Information5.4.2 Lockout Reset WARNINGExplosion HazardIf control l

SECTION 5: PROGRAMMING AND OPERATION23 of 405.4.3 Override and Summer Mode OVERSUMMERENTERZONE NAME 20°CHEAT OFFIf user code not programmed in engi

© 2014 Roberts-Gordon Europe LimitedAll rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL24 of 405.4.4 Manual Fan Operation

SECTION 5: PROGRAMMING AND OPERATION25 of 405.5 Manager Settings5.5.1 Manager Network Access

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL26 of 405.5.2 Set TemperatureENTERZONE NAME 20°CHEAT OFF1) TEMP 2) DATA 3)

SECTION 5: PROGRAMMING AND OPERATION27 of 405.5.3 Set Operating TimesZONE NAME 20°CHEAT OFF1) TEMP 2) DATA 3) SYSTEM 4) HOLSPres 1-4 for require

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL28 of 405.5.4 Set System Time and System Code

SECTION 5: PROGRAMMING AND OPERATION29 of 405.5.5 View Logged Data

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL30 of 405.5.6 Set Holiday Period** WARNING! **ENTRY CODE: ????4Holiday Period: 0

SECTION 5: PROGRAMMING AND OPERATION31 of 405.6 Engineer SettingsAll engineer settings must be carried out at individual control.5.6.1 Network Configu

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL32 of 405.6.2 Set Override Hours and Optimisation

SECTION 5: PROGRAMMING AND OPERATION33 of 405.6.3 Set Access Code and Configure

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL34 of 40Table 1: Recommended Configuration Settings for Appliance TypeFunction T

SECTION 5: PROGRAMMING AND OPERATION35 of 405.6.4 Set Fan Operation

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL36 of 405.6.5 Set Sensor Calibration

SECTION 5: PROGRAMMING AND OPERATION37 of 405.6.6 Set Service Mode

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL38 of 405.6.7 System Reset

SECTION 6: STANDARD SCREEN MESSAGES39 of 40SECTION 6: STANDARD SCREEN MESSAGES6.1 Stand Alone Control Screen Messages

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL40 of 406.2 Network Control Screen MessagePage 39, Section 6.1 screen messages a

TABLE OF FIGURESFigure 1: Keypad Layout ... 4Figure 2: Remote Sensors ...

1 of 40Product ApprovalROBERTS GORDON® appliances have been tested and CE certified as complying with the essential requirements of the Gas Appliance

ROBERTS GORDON® NRG CONTROL INSTALLATION, OPERATION AND SERVICE MANUAL2 of 40SECTION 1: INTRODUCTIONYour Safety is Important to Us!This symbol is used

SECTION 1: INTRODUCTION3 of 40It will then be possible to set program times and temperatures for all controls from one location and copy programs from