Roberts Gorden operation & service Service Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
HE-SERIES INSTALLATION, OPERATION AND SERVICE MANUAL
26
SECTION 7: OPTIONAL HEATER ACCESSORIES
7.1 U-Tube Configuration
Heaters (except HE-40) are approved for optional U-
Tube configurations.
The U-Tube may be installed in either a standard
horizontal position, a 45° position or in an
opposite 45° position as shown on Page 8, Figure 7
through Figure 9. When using a U-Tube
configuration, the following additional rules must be
adhered to:
• A minimum of 10' (3 m) on HE-60/80 and a
minimum of 15' (4.5 m) on HE-100/125/150/175 is
required between the burner and the U-Tube.
• The correct turbulator (See Page 22, Figure 6.5)
must be installed in the last standard section of
tube.
• The burner must never be operated in a tilted
position.
• The heater must be properly supported at all
locations. See Page 28, Figure 19.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Comments to this Manuals

No comments